Categories

GEE BEE R3 (PNP)

SKU: RZ00779


Current rating is 5.00. Total votes 1.
Product image Product image Product image
Product image Product image Product image
This GEE BEE R3 is a replica of the famous racing aircraft. The R3 was designed to the end era of racing airplanes and replaced their famous and successful predecessors GEE BEE.
This scale model combines the aesthetics and the flight characteristics of the original plane and is easy to handle at low speeds. The impressive appearance and nice fantastic finish give the GEE BEE R3 its distinctive look in flight. Flying can begin quickly without much construction effort / hassles as all the servos and the motor with controller is completely per-installed. All you will need now is a 3 cell 2200mah 20C lipo and a tx/rx to get this in the air.

Specifications:
● Wing Span: 1200mm/47.24in
● Length: 1140mm/44.46in
● Weight: 1150g
● Thrust rate:1:1

Configuration (comes with)
● Motor:  Out runner brushless AT3511 KV750
● ESC: 30A Brushless ESC
● Servo: 9g*2 plus 17g*2

Requires
● Battery: LI-PO 11.1V,2200mAh 20C
● Charger: 3 cell lipo charger
● Radio: Avionic RCB7X transmitter & receiver

Features:
● Super power and Thrust weight ratio is 1:1
● It can finish the inverted flight, inside loops, outside loops, axial rolls, side flying and other aerobatic actions
● Stable flight and easy to control
● EPO foam material with high crash-resistance advantage
● Scale appearance and vivid gesture
● With big size water drop shape spinner, it make the spinner more nice and stronger
● Scaled tawny transparent canopy, it matched with the airplane perfectly
● With the upper and down spring steel wire on the main wings and fuselage, it is easy to assemble and disassemble, and it is easy to carry
● The rudder matched with the fuselage and tail wheel perfectly, and it is convenient to assemble and disassemble
● With the detachable horizontal wing , it is easy to assemble and disassemble
● With the building block design power system, it is easy to assemble and disassemble
● With the perfect aileron servo box, it is easy to maintain the aileron servo
● With the detachable horizontal wing servo mounting plate, it is easy to maintain the elevator servo
● Perfect propeller design and with beautiful appearance
 

Rs 7,998.00 incl tax
Stock :  
Customers Who Bought This Item Also Bought

Carbon fiber solid rod - 2.0 x 1000mm (special shipping)

Picture of Carbon fiber solid rod - 2.0 x 1000mm (special shipping)
Rs 69.00 incl tax
Stock : 

Wolfpack 2200mah 25c 11.1V

Picture of Wolfpack 2200mah 25c 11.1V
Rs 990.00 incl tax
Stock : 

Starlet 18" rubber powered glider

Picture of Starlet 18" rubber powered glider
Rs 340.00 incl tax
Stock : 

Sky captain rubber powered

Picture of Sky captain rubber powered
Rs 310.00 incl tax
Stock : 

Knight rubber powered plane

Picture of Knight rubber powered plane
Rs 275.00 incl tax
Stock : 

Police rubber powered plane

Picture of Police rubber powered plane
Rs 275.00 incl tax
Stock : 
Product reviews
sky surfer v3
a very good glider

From: abhishek gyani | Created on: 4/8/2014 6:34 PM

Was this review helpful? Yes  No (0 / 0)
very high courier charges
Just dropped the idea just becoz your shipping charges are almost half the cost of the complete kit cost.

From: Siva Kumar | Created on: 11/16/2013 9:46 AM

Was this review helpful? Yes  No (0 / 0)
Good model
I think this one is better than Gee Bee electric. Completely readymade. Ordering this right now.

From: Siva Kumar | Created on: 11/13/2013 4:22 PM

Was this review helpful? Yes  No (0 / 0)
nice looking
nice looking modded g3

From: avesh kadri | Created on: 6/23/2013 7:38 PM

Was this review helpful? Yes  No (0 / 2)

Live Chat

Subscribe to newsletters

Email: